Parts, service and technical advice for every brand of attachment — not just the ones we sell.
Ballyclare, Co. Antrim 028 9335 4878
Menu
Shop AttachmentsNPK — Japanese premium General Breaker — Korean value BYG — full demolition range Tecna — Italian made Genesis — shears & processors XploSafe — cab safety shields Parts Hose & Fittings Service Gallery About Contact
Call 028 9335 4878 Mobile 07542 131513
NPK · Japan

NPK concrete crushers & crunchers.

Nineteen crushers and nine crunchers, for carriers from 1.3 tonne to 100 tonne. Reduce the concrete where it falls instead of carting it away whole, and take the rebar out of it while you are at it.

NPK concrete crusher
NPK concrete cruncher
The booster

Why an NPK jaw closes harder on less oil.

Every NPK crusher and cruncher carries an integrated hydraulic booster. When the jaws meet resistance it activates on its own — more crushing force from a relatively low oil flow, faster cycle times, and the rest of the machine’s functions unaffected. Because the booster sits inside the attachment, the tool is lighter and simpler to maintain than one with a bolt-on intensifier. NPK have been building it for over thirty-five years. The SV series runs two cylinders and two boosters.

Crushers · pick by carrier

Primary demolition — walls, floors and structure.

X series for mini and midi machines, S and SV series from 10 tonne up. Most models rotate 360° hydraulically; the X series is mechanical as standard with hydraulic rotation on request.

ModelCarrier weightWeightSeries
X-11.3 – 2.0 t130 kgX
X-3A2.5 – 4.0 t280 kgX
X-4A3.5 – 5.5 t350 kgX
X-7A6 – 9 t670 kgX
SV-7XR6 – 9 t745 kgSV
S-13XCR10 – 15 t1,485 kgS
SV140R10 – 16 t1,450 kgSV
S-16XCR14 – 18 t1,820 kgS
S-23XCR19 – 21 t2,370 kgS
SV250R19 – 28 t2,470 kgSV
S-24XCR19 – 27 t2,550 kgS
S-36XCR29 – 38 t3,800 kgS
SV380R29 – 38 t3,800 kgSV
SV400R29 – 38 t4,100 kgSV
S-42XCR39 – 48 t4,550 kgS
SV500R39 – 48 t4,960 kgSV
SV-65XR60 – 70 t6,625 kgSV
SV700R60 – 100 t7,440 kgSV
SV-100XR80 – 100 t9,200 kgSV

R suffix denotes hydraulic rotation. X-3A, X-4A and X-7A are also available as X-3AR, X-4AR and X-7AR with rotation, adding roughly 5–33 kg.

Crunchers · pick by carrier

Secondary reduction and getting the steel out.

The G series works oversize concrete at ground level after it is down, separating rebar from concrete on site — which is where the haulage saving is. The U series adds a single centre tooth that concentrates the force to one point, so it crushes as well as crunches, plus a longer cutter for rebar and light steel, and 360° rotation.

ModelCarrier weightWeightSeries
G706 – 10 t690 kgG – secondary
G12010 – 17 t1,165 kgG – secondary
G-18JX17 – 22 t2,150 kgG – secondary
G-25JEH19 – 28 t2,650 kgG – secondary
G-28JX25 – 38 t2,910 kgG – secondary
G-35JEH29 – 48 t3,550 kgG – secondary
U-21JXR19 – 28 t2,325 kgU – primary & secondary
U-31JXR29 – 48 t3,455 kgU – primary & secondary
U-47JXR45 – 55 t4,850 kgU – primary & secondary

J-type models have a replaceable tooth plate on the arm, X-type on the frame, JX-type on both — so the wear part comes off rather than the tool going in the skip.

Ask us to spec one

Build detail

What you notice on site.

Low weight, long reach

Slim-line design

Piston rod and hoses run inside the frame, so there is nothing hanging out to catch. Stable enough for high-lift demolition.

Large jaw opening

Fast cycles

From 2.3 seconds open-to-close unloaded, up to 26 cycles a minute.

Reinforced cutters as standard

Wear parts

Replaceable tooth plates and reinforced steel cutters — you renew the part that wears, not the tool.

No pressure reduction needed

Fits your machine

No additional pressure reduction is required in the excavator’s hydraulic system.

The X, S and SV crusher ranges are available with NPK’s C-type arm, reshaped to improve crushing ability and arm durability, and the X series with carbide-sprayed tooth design.

NPK concrete crushers and pulverizers
Not sure which

Crusher, cruncher or pulverizer?

They overlap, and the wrong one costs you time. Roughly: a crusher takes the structure down, a cruncher reduces what is on the ground and frees the rebar, a pulverizer works walls and floors and separates steel from concrete for recycling. Plenty of jobs want two of the three.

Tell us the machine and the job and we will tell you which — including when one tool will do what you thought needed two.

See the pulverizer range
Get in touch

Tell us the carrier and the job.
We’ll tell you the right tool.

Tell us the carrier, the material and roughly how much of it there is. We’ll tell you which model suits the machine and the job, and what it costs.

WorkshopUnit 5, Dennison Industrial Estate
Ballyclare, Co. Antrim, BT39 9EB
HoursMon–Fri, 9am–5pm. Ring anytime during the working day — if we’re in the workshop, leave a message on the mobile and we’ll come back to you.

Request a quote

We answer enquiries ourselves, usually the same working day.