Low weight, long reach
Slim-line design
Piston rod and hoses run inside the frame, so there is nothing hanging out to catch. Stable enough for high-lift demolition.
Nineteen crushers and nine crunchers, for carriers from 1.3 tonne to 100 tonne. Reduce the concrete where it falls instead of carting it away whole, and take the rebar out of it while you are at it.


Every NPK crusher and cruncher carries an integrated hydraulic booster. When the jaws meet resistance it activates on its own — more crushing force from a relatively low oil flow, faster cycle times, and the rest of the machine’s functions unaffected. Because the booster sits inside the attachment, the tool is lighter and simpler to maintain than one with a bolt-on intensifier. NPK have been building it for over thirty-five years. The SV series runs two cylinders and two boosters.
X series for mini and midi machines, S and SV series from 10 tonne up. Most models rotate 360° hydraulically; the X series is mechanical as standard with hydraulic rotation on request.
| Model | Carrier weight | Weight | Series |
|---|---|---|---|
| X-1 | 1.3 – 2.0 t | 130 kg | X |
| X-3A | 2.5 – 4.0 t | 280 kg | X |
| X-4A | 3.5 – 5.5 t | 350 kg | X |
| X-7A | 6 – 9 t | 670 kg | X |
| SV-7XR | 6 – 9 t | 745 kg | SV |
| S-13XCR | 10 – 15 t | 1,485 kg | S |
| SV140R | 10 – 16 t | 1,450 kg | SV |
| S-16XCR | 14 – 18 t | 1,820 kg | S |
| S-23XCR | 19 – 21 t | 2,370 kg | S |
| SV250R | 19 – 28 t | 2,470 kg | SV |
| S-24XCR | 19 – 27 t | 2,550 kg | S |
| S-36XCR | 29 – 38 t | 3,800 kg | S |
| SV380R | 29 – 38 t | 3,800 kg | SV |
| SV400R | 29 – 38 t | 4,100 kg | SV |
| S-42XCR | 39 – 48 t | 4,550 kg | S |
| SV500R | 39 – 48 t | 4,960 kg | SV |
| SV-65XR | 60 – 70 t | 6,625 kg | SV |
| SV700R | 60 – 100 t | 7,440 kg | SV |
| SV-100XR | 80 – 100 t | 9,200 kg | SV |
R suffix denotes hydraulic rotation. X-3A, X-4A and X-7A are also available as X-3AR, X-4AR and X-7AR with rotation, adding roughly 5–33 kg.
The G series works oversize concrete at ground level after it is down, separating rebar from concrete on site — which is where the haulage saving is. The U series adds a single centre tooth that concentrates the force to one point, so it crushes as well as crunches, plus a longer cutter for rebar and light steel, and 360° rotation.
| Model | Carrier weight | Weight | Series |
|---|---|---|---|
| G70 | 6 – 10 t | 690 kg | G – secondary |
| G120 | 10 – 17 t | 1,165 kg | G – secondary |
| G-18JX | 17 – 22 t | 2,150 kg | G – secondary |
| G-25JEH | 19 – 28 t | 2,650 kg | G – secondary |
| G-28JX | 25 – 38 t | 2,910 kg | G – secondary |
| G-35JEH | 29 – 48 t | 3,550 kg | G – secondary |
| U-21JXR | 19 – 28 t | 2,325 kg | U – primary & secondary |
| U-31JXR | 29 – 48 t | 3,455 kg | U – primary & secondary |
| U-47JXR | 45 – 55 t | 4,850 kg | U – primary & secondary |
J-type models have a replaceable tooth plate on the arm, X-type on the frame, JX-type on both — so the wear part comes off rather than the tool going in the skip.
Slim-line design
Piston rod and hoses run inside the frame, so there is nothing hanging out to catch. Stable enough for high-lift demolition.
Fast cycles
From 2.3 seconds open-to-close unloaded, up to 26 cycles a minute.
Wear parts
Replaceable tooth plates and reinforced steel cutters — you renew the part that wears, not the tool.
Fits your machine
No additional pressure reduction is required in the excavator’s hydraulic system.
The X, S and SV crusher ranges are available with NPK’s C-type arm, reshaped to improve crushing ability and arm durability, and the X series with carbide-sprayed tooth design.

They overlap, and the wrong one costs you time. Roughly: a crusher takes the structure down, a cruncher reduces what is on the ground and frees the rebar, a pulverizer works walls and floors and separates steel from concrete for recycling. Plenty of jobs want two of the three.
Tell us the machine and the job and we will tell you which — including when one tool will do what you thought needed two.
See the pulverizer rangeNPK rock breakers NPK pulverisers NPK demolition grabs NPK compactors Back to NPK
Tell us the carrier, the material and roughly how much of it there is. We’ll tell you which model suits the machine and the job, and what it costs.